Systor 1 Burner M-Disc 24X CD DVD Duplicator

Premium DVD Duplicators M-DISC Support

1 M-Disc Burner 24X CD DVD Duplicator Tower

10 Pack MDisc Blank Media + Free USB (£40 Value)

Price with VAT: £ 210,00

Price w/o VAT:: £ 175,00

Regular price: £ 252,00

Code:SYS01MD

Connectivity:
Warranty:
DVD Pack:
Quantity:

E-mail: office@duplicator4all.com

Designed to etch permanent data onto M-DISC media

- Description
- Features
- Specifications
- Warranty
- How USB Works

M-disc, Write Once and Read Forever

Designed to etch permanent data onto M-DISC media

M-disc, Write Once and Read Forever

The M-disc - Testimonial

The M-disc - A Permanent Storage Solution

You might feel like you're making a "permanent" backup of your files when you copy them onto a DVD or backup to a computer hard-drive, but the truth is these devices suffer from natural decay and degradation. Current DVD technology uses organic dyes and low laser power to make marks on the data layer of a standard recordable DVD. Over time, these marks become unreadable because organic dyes degrade when exposed to minimal levels of light, heat, and humidity. This means all the data you thought was safely stored could be lost because the discs you used have an average lifespan of only about 3 to 5 years! Why would you risk your data based on an average; hundreds of discs taken into account in that average were corrupt and unreadable after only a few months. With Millenniata, we don't subject you to the possibility of losing your data. When we say write once and read forever, we mean it.

Designed to etch permanent data onto M-DISC media

How does the M-DISC compare to other DVD sand optical discs?

Millenniata utilizes chemically stable and heat-resistant materials that are not used in any other DVD or optical disc! These materials cannot be overwritten, erased, or corrupted by natural processes. The normal laser energy employed to write DVDs or CDs cannot successfully write to the patented inorganic and synthetic materials used in the M-DISC.
Data is stored on the M-DISC by physically altering the recording layer and creating permanent voids or holes. DVDs and other optical discs use organic dyes that break down over time, resulting in corrupt and unreadable data. These organic dyes are highly susceptible to temperature, humidity and even sunlight, starting to fade and decay the moment you record data.
Millenniata's recording process utilizes higher temperatures and as much as 5 times more energy than any ordinary optical disc. This allows for permanent engraving on the M-DISC, what we refer to as pits. These pits are not affected by temperature, humidity and sunlight the same way dyes are, because the pits are permanent. This means when you burn data onto the M-DISC, it will last as long as you need it to.

How do we know?

The Naval Air Warfare Center at China Lake tested the M-DISC against the best conventional archival discs on the market produced by Mitsubishi, Verbatim, Taiyo Yuden, Delkin and MAM-A. The conditions were based on the 85°C/85% relative humidity industry test standard, supplemented with full-spectrum sunlight. The Navy's goal was to simulate conditions at sea or in combat, which experience has shown to be a disc killer. The conclusion? The M-DISC suffered no data degradation at all while discs from Mitsubishi, Verbatim, Taiyo Yuden, Delkin and MAM-A failed after the stress period.
The Naval Air Warfare Center at China Lake has published these conclusions in the study, "Accelerated Life Cycle Comparison of Millenniata Archival DVD." Conventional optical discs subjected to the same level of testing failed within 2 days while the M-DISC was not affected.

Naval Air Warfare Center Report - Full Report Summary Report

Notice of Proposed Sole Source Procurement - State of Utah

Tech Note - Data Layer Stability

Tech Note - Pits are Better

Tech Note - Rock-Like Layer

How can I access my data on an M-DISC?

Once written, the M-DISC can be read or played on any quality DVD drive that supports the common DVD+R/RW format. Most DVD drives that were manufactured after 2005 and almost all Blu-ray or BD drives support this format.

Designed to etch permanent data onto M-DISC media

The SYS01MD groundbreaking optical disc technology that will last for more than a thousand years, M-DISC duplicators and media provide an innovative way to write data once and read forever. Unlike ordinary discs that use organic dyes to keep data, M-DISC utilizes stable and heat-resistant chemical materials where information cannot be overwritten, erased, or corrupted by natural deterioration. Regular CD and DVD lasers cannot successfully etch information to the patented inorganic and synthetic materials used with M-DISC.

Optional Performance:

The M-DISC duplicator is designed to copy onto M-DISC blank media along with standard CD and DVD blank media. Additionally, the top-quality M-DISC system eliminates common problems caused by previous drive/disc interactions. Performance is enhanced when the M-DISC duplicator etches data onto M-DISC media extremely sharp and clear to enable current CD and DVD players to read the finished discs without a problem.

Laser-Etching Data:

Etching the rock-hard data layer encased in the M-DISC requires more power than what's found in a typical optical disc drive. The combination of an optimized laser and optical system with unique, control algorithms in the M-DISC duplicator allows rigorous performance-driven digital data etching into "stone".

Durability:

While the M-DISC duplicator probably won't last as long as the well-preserved data on the M-DISC media, the durable build of the M-DISC duplicator should still outlast most other optical disc drives and duplicators. With an Anti-Dust design, the chassis insulation aids in the protection of the drive's internal components from dust and small particles that can hinder the drive's operability and lifespan.

Functionality:

Preserving data for the ages should not be a difficult task, and the M-DISC duplicator reflects that philosophy. An easy-to-use LCD display controller interface and standalone operation means no computer or software is required to operate by any type of level user.

High-Speed USB 2.0 Connection:

When connected to a computer using the external connection, one of the optical burner drives on the duplicator becomes activated as an external burner.

This machine does not burn any copy protected DVDs or CDs

For questions or detailed product information,
please call us toll-free at 0800 181 4112

Reader/Source	:	High Speed DVD-ROM
Writer/Target	:	24X SATA M-DISC Drive
Maximum Write Speed on M-DISC DVD:	:	DVD-R: 4x
Maximum Write Speed on Regular Disc	:	DVD-R: 24x DVD+RW: 8x DVD-RW: 6x DVD-R DL: 8x DVD-RAM: 12x CD-R: 48x CD-RW: 32x
Maximum Read Speed on Regular Disc	:	DVD-R: 16x DVD-RW: 13x DVD-R DL: 12x DVD-RAM: 12x CD-R/ROM: 48x CD-RW: 40x CD-DA: 40x
Media Supported	:	M-DISC DVD-R (DL) DVD-RW (DL) DVD-RAM DVD +R (DL) DVD +RW CD-ROM CD-R and CD-RW with 80mm and 120mm diameter
Power	:	AC 110/230V (50/60 Hz)

3 years labor, 1 year parts warranty

The standard warranty covers the cost of parts and labor against any manufacturer defect within the first year from the original purchase date.

The cost of labor for product maintenance issues due to defect or malfunction will be honored up to the first 3 years from the original purchase date.

Lifetime technical support is provided standard.
Do you know how your USB connection Works?

If not, we will explain to you how the FREE USB connection works!

For your PC to see the duplicator you need to activate the USB port.
First you need to check if the option is already activated from the advanced menu, to do this follow these steps:
- select Menu USB Connection
- turn it to ON and press ENT
The duplicator will automatically reboot, please alow the duplicator to finish the process and do NOT use it until the process is completed.

If you cannot see Menu: USB Connection that means it's not actived yet from the ADVANCED MENU.

To do this, follow the next steps:

Press and hold for more then 3 sec the ESC button and a new menu will appear: Menu 13 (Adv Menu).
In this menu you need to find Submenu: USB Options and switch it to ON.
When this process is done, press ESC button once to return to the main menu.
Now you will see an extra option: Menu: USB Connection.
This beeing complete you will need to follow the first steps from the tutorial to switch the USB Connection to ON.

Please be advised that once you activate the USB Connection, in stand alone mode, your Duplicator machine will not see or use the last/buttom burner for duplication.